
Chapter 6 The Extended Audio Matrix. PRELIMINARY Release MSD Software Manual.
6.2.1.2.2 SDI Audio Group selection.
To select one of the four audio groups in the SDI video signal use the arrow
[] / [] keys to move the green selection bar to the item called ‘AUDIO
GROUP’ and then press the [SELECT] key.
From the group select menu, use the arrow [] / [] keys to move the green
selection bar to the desired audio group and then press the [SELECT] key. If
the selected audio group contains valid audio, the ‘SDI AUDIO Lock’ flag will
turn green. The ‘AUDIO CH 1 – 2 LOCK’ and ‘AUDIO CH 3 – 4 LOCK’ flag will
also turn green if the respective channel pairs contain valid audio.
Note: If system select is set to AUTO detect and the selected audio group does
not contain any valid AES audio, the MSD will try to detect the video system
and the ‘SDI Lock’ flag will alternate between 525 Line NTSC and 625 Line
PAL.
6.2.1.3 HD-SDI Input Options.
If the MSD is fitted with a HD-SDI de-embedding module it is possible to de-
embed the audio from the digital video signal. As with the standard SDI-signal
there can be a total of 16 channels embedded in the video signal. These audio
channels are grouped into four groups of four channels. Each group can be
split up into two stereo pairs. It is therefore possible to de-embed a stereo pair
from two different audio groups. Please observe that only two stereo pairs can
be de-embedded at a time.
6.2.1.3.1 HD-SDI Video System.
The HD-SDI de-embedding module supports 13 different video systems. To
select between video systems use the arrow [] / [] keys to move the green
selection bar to the item called ‘VIDEO SYSTEM’ and then press the [SELECT]
key.
From the ‘SYSTEM SELECT’ window use the arrow [] / [] keys to select
the preferred video system and then press [SELECT] to set the system or
press [EXIT] to abandon the changes. Please note that the MSD can not
automatically detect the video system.
Page 12 of 64. PRELIMINARY Release
The SD-Group Select Window.
The HD-SDI Option Window.
The HD-SDI system select Window.
Comentários a estes Manuais