DK Digital CDB-700 Manual do Utilizador descarregar pdf (Página 68)

Page 68 of 108

6. Information on specific controls

The ACC (Attendant Control Compact) is ﬁtted to advanced hospital and patient care beds for use where

patient positioning must be carefully controlled by medical staff.

1. ACC (MEDLINE

CARELINE

)

The OpenBus

system makes it possible to use keypads as Attendant Controls or Handsets integrated in the

bed side rails. The keypads are named ACK (Attendant Control Keypads).

The protection class is dependent on customer design and testing.

2. ACK (MEDLINE

CARELINE

)

The ACL (Attendant Control Lock) box is a one turn button box ﬁtted to hospital and care beds for use where

the patient positioning must be carefully controlled by the medical staff.

The ACL disconnects all functions on some handsets.

3. ACL (MEDLINE

CARELINE

)

Features and Options:

• There is no IP rating as standard, please contact LINAK A/S if a special IP rating is required

Usage:

• Compatibible with OpenBus™ control boxes e.g. CB20

• Ambient temperature: +5˚ to + 40˚C

• For approvals information see Lintra/Development/Certiﬁcates

For LINAK Standard ACK’s, the following is applicable:

• Colour: Grey RAL 7035

• Adhesive for the standard ACK is 3M 468MP

• For information re. suitable and unsuitable surfaces, please see 3M’s webpage

• Standard recommandation for curing time is 72 hours

• The customer is responsible for correct mounting on suitable surfaces

For datasheets and additional informations regarding the adhesives: www.3M.com

For Customised ACK’s, the following is applicable:

Dependant on the customer’s own design, installation, application and test it is possible to improve the IP protection class by the use of a special ACK

introducing an extra sealing ring to prevent against ingress

Mounting and curing time is dependant on customer’s application.

For datasheets and additional information regarding the adhesives: www.3M.com

Recommendations:

• The customer is responsible for the cable strain relief.

• Precautions against ESD (Electrostatic discharge) should be taken, as the PCBA is delivered separately.

• ESDS devices must under no circumstances, during transport, storage, handling, production or mounting in an application, be exposed to harmful ESD.

• The customer is responsible for correct mounting of the ACK on suitable surfaces.

• Keypads, PCBA and cables are supplied separately and have to be mounted by the customer.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 107 108

Comentários a estes Manuais

Sem comentários

DK Digital CDB-700 Manual do Utilizador Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com não DK Digital CDB-700