DK Digital CDB-700 Manual do Utilizador descarregar pdf (Página 92)

Page 92 of 108

The Under Bed Light (UBL2) provides a powerful light with

a good distribution. The UBL2 is to be used for beds within

hospitals, nursing homes and in homecare.

The Under Bed Light makes it easier for patients and other

people in need of care to ﬁnd their way at night in the dark

to prevent falling accidents and to make them feel safe.

9. Under Bed Light 2 (MEDLINE

CARELINE

)

Usage:

• Operating temperature: +5°C to +40°C

• Storage temperature: -10°C to +50°C

• Relative humidity: 10% to 80% at +30°C not condensing

• Atmospheric pressure: 700 to 1060hPa

• Approvals: EN62471, IEC60601-1:2005, 3

edition (approvals are currently pending)

Recommendations & precautions:

• Screw holes in application are needed for mounting. Inform the customer to use M4 Ø12 screws with Ø12 washer, when mounting the UBL2.

Max. torque 2.5 Nm.

• Hot-plugging:

Removing or adding any OpenBus™ cables is not allowed when the CB is powered by mains supply!

If needed anyway, follow the below procedure:

1. Remove mains and wait 5 sec.

2. Mount or dismount the required cables

If this procedure is NOT followed, it may result in a damaged OpenBus™ driver circuit. The risk of a damaged circuit increases if the accessory

has a high start current (in rush current).

• There can be a risk of conflict with other OPENBUS™ accessories, like HB, ACP, etc. when using the OpenBus™ UBL2, it is therefore

recommended to make a system/bit overview.

• Always use locking mechanism and O-ring

• Sockets not used must be fitted with blind plugs to ensure IP Degree

• The UBL2 must be mounted on a plane surface and casing must not be subject to impact or any kind of stress.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 107 108

Sem comentários

DK Digital CDB-700 Manual do Utilizador Página 92